Atmel Computer Drive AT85RFD 07 User Manual

AT85RFD-07 Getting Started  
..............................................................................................  
User Guide  
 
Section 1  
Introduction  
The AT85RFD-07 Starter Kit is designed to give designers a quick start to develop code  
on the AT85C51SND3Bx as well as for prototyping and testing of new designs.  
1.1  
Atmel  
Registration  
In order to keep posted on any new information concerning the AT85C51SND3Bx prod-  
ucts (new firmware delivery, new tool version, …) register at the following address:  
As soon as you are registered, edit your preferences and ‘check’ the 8051 radio button  
in the e-mail notification section.  
AT85RFD-07 Getting Started User Guide  
1-1  
7712A–MP3–02/07  
 
Section 2  
Package Download  
The Nand Flash memory of the AT85RFD-07 is delivered pre-programmed with the  
demo firmware and AT85C51SND3B documentation. Since the board is manufactured  
in large quantities, the package may be out of date. It is strongly recommended to down-  
load the latest version of the AT85C51SND3B package from our web site.  
The following paragraphs explain how to retrieve the package from the web site or from  
the Nand Flash memory.  
2.1  
Web Site  
download  
1. Connect to:  
User Name is: atmelmp3  
Password is: snd3pass  
2. Copy the at85c51snd3b.zip file to your PC.  
3. Unzip the package to your local hard drive.  
2.2  
Nand Flash  
Download  
1. Connect the USB cable to the player and to a PC.  
The demonstration firmware starts and enters the mass-storage application:  
A new USB device is installed and a removable disk is mounted in the explorer:  
Note: The disk letter may differ.  
The AT85RFD-07 disk corresponds to the on-board Nand Flash memory.  
AT85RFD-07 Getting Started User Guide  
2-3  
7712A–MP3–02/07  
 
Package Download  
2. Open the AT85RFD-07 disk, its content is as follows:  
The Atmel directory contains the AT85C51SND3B package.  
The Update directory is the location where to place the update package for the auto-  
matic firmware upgrade feature (see firmware user’s guide).  
3. Copy the Atmel directory to your local hard drive.  
2.3  
Package Content The package content is the following:  
...... Development kit package  
............. Dev-kit user’s guides  
............. Link to dev-kit firmware  
............. Hardware package  
...... Reference design package  
............. Ref-dsn user’s guides  
............. Link to ref-dsn firmware  
............. Hardware package  
...... Link to datasheet on Atmel web site  
...... Firmware packages  
............. Firmware user’s guide & application notes  
...... Development tools  
............. Atmel font generator  
............. Atmel in system programming  
............. Atmel on-chip debug  
.....................OCD dongle recovery tool  
.....................Flip tool for dongle upgrade  
.....................Keil debug drivers  
............. Atmel screen generator  
............. USB mass-storage drivers (Win98, Linux)  
............. Freeware USB bench32 tool  
...... Training material  
............. Hands-on tutorial  
............. Whole AT85C51SND3Bx presentations  
2-4  
AT85RFD-07 Getting Started User Guide  
7712A–MP3–02/07  
 
Section 3  
Tools Install  
3.1  
Requirement  
Firmware has been developed and debugged using the Keil® µvision IDE. It is a project  
oriented fully integrated environment including debugger and advanced compiling and  
linking options like code banking.  
In order to start development with AT85C51SND3B, it is required that the Keil environ-  
ment is installed on the PC.  
3.2  
In System  
Programming  
The in system programming install consists of:  
Atmel MusicPlayerIsp Tool  
SunJava Run time Environment if necessary  
3.2.1  
MusicPlayerIsp  
To install the Atmel MusicPlayerIsp, go to “Atmel\at85c51snd3b\Tools\In System Pro-  
gramming” directory and execute music-player-isp-X_Y_Z.exe; where X_Y_Z is the tool  
revision number.  
Press Next to proceed  
AT85RFD-07 Getting Started User Guide  
3-5  
7712A–MP3–02/07  
 
Tools Install  
Read and accept the licence agreement  
Select the installation directory (use the proposed default)  
3-6  
AT85RFD-07 Getting Started User Guide  
7712A–MP3–02/07  
 
Tools Install  
Validate the information  
The installation starts…  
AT85RFD-07 Getting Started User Guide  
3-7  
7712A–MP3–02/07  
 
Tools Install  
Do not restart your computer, exit the current session and log-in again  
Start MusicPlayerIsp to check Java runtime installation  
If the following pop-up appears, proceed with the SUNJRE installation  
3.2.2  
SUN JRE  
To install the JRE, go to “Atmel\at85c51snd3b\Tools\In System Programming” directory  
and click on the “Sun JRE download” URL shortcut.  
Follow the install procedure of the SUN JRE.  
3.3  
USB Devices  
Installation  
In order to complete the installation, the AT85C51SND3B ISP USB device must be  
installed.  
3.3.1  
AT85C51SND3B ISP A USB removable mass-storage disk will be installed after plug-in.  
USB device  
– Press the ISP button  
– Plug the board to a PC using the USB cable  
A new USB device is installed and one removable disk is mounted in the explorer:  
Note: The disk letter may differ.  
3-8  
AT85RFD-07 Getting Started User Guide  
7712A–MP3–02/07  
 
Atmel Corporation  
Atmel Operations  
2325 Orchard Parkway  
San Jose, CA 95131, USA  
Tel: 1(408) 441-0311  
Fax: 1(408) 487-2600  
Memory  
RF/Automotive  
Theresienstrasse 2  
Postfach 3535  
74025 Heilbronn, Germany  
Tel: (49) 71-31-67-0  
Fax: (49) 71-31-67-2340  
2325 Orchard Parkway  
San Jose, CA 95131, USA  
Tel: 1(408) 441-0311  
Fax: 1(408) 436-4314  
Microcontrollers  
Regional Headquarters  
2325 Orchard Parkway  
San Jose, CA 95131, USA  
Tel: 1(408) 441-0311  
Fax: 1(408) 436-4314  
1150 East Cheyenne Mtn. Blvd.  
Colorado Springs, CO 80906, USA  
Tel: 1(719) 576-3300  
Europe  
Atmel Sarl  
Route des Arsenaux 41  
Case Postale 80  
CH-1705 Fribourg  
Switzerland  
Tel: (41) 26-426-5555  
Fax: (41) 26-426-5500  
Fax: 1(719) 540-1759  
Biometrics/Imaging/Hi-Rel MPU/  
High Speed Converters/RF Datacom  
Avenue de Rochepleine  
BP 123  
38521 Saint-Egreve Cedex, France  
Tel: (33) 4-76-58-30-00  
Fax: (33) 4-76-58-34-80  
La Chantrerie  
BP 70602  
44306 Nantes Cedex 3, France  
Tel: (33) 2-40-18-18-18  
Fax: (33) 2-40-18-19-60  
Asia  
Room 1219  
ASIC/ASSP/Smart Cards  
Zone Industrielle  
13106 Rousset Cedex, France  
Tel: (33) 4-42-53-60-00  
Fax: (33) 4-42-53-60-01  
Chinachem Golden Plaza  
77 Mody Road Tsimshatsui  
East Kowloon  
Hong Kong  
Tel: (852) 2721-9778  
Fax: (852) 2722-1369  
1150 East Cheyenne Mtn. Blvd.  
Colorado Springs, CO 80906, USA  
Tel: 1(719) 576-3300  
Japan  
9F, Tonetsu Shinkawa Bldg.  
1-24-8 Shinkawa  
Chuo-ku, Tokyo 104-0033  
Japan  
Tel: (81) 3-3523-3551  
Fax: (81) 3-3523-7581  
Fax: 1(719) 540-1759  
Scottish Enterprise Technology Park  
Maxwell Building  
East Kilbride G75 0QR, Scotland  
Tel: (44) 1355-803-000  
Fax: (44) 1355-242-743  
Literature Requests  
Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any  
intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN ATMEL’S TERMS AND CONDI-  
TIONS OF SALE LOCATED ON ATMEL’S WEB SITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY  
WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR  
PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDEN-  
TAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT  
OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no  
representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications  
and product descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically providedot-  
herwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel’s products are not intended, authorized, or warranted for use as compo-  
nents in applications intended to support or sustain life.  
©2007 Atmel Corporation . All rights reserved. Atmel®, logo and combinations thereof, and Everywhere You Are® are the trademarks or regis-  
tered trademarks, of Atmel Corporation or its subsidiaries. Other terms and product names may be trademarks of others.  
Printed on recycled paper.  
7712A–MP3–02/07  
 

3Com Two Way Radio 860 User Manual
Acer Laptop M5400G User Manual
Aiwa Stereo System XR DV700 User Manual
Akai Music Mixer dps24 User Manual
Albatron Technology Computer Hardware PX845PEV 800 User Manual
Alto Shaam Vacuum Cleaner DX 845 W User Manual
American Audio Portable Multimedia Player Media Operator User Manual
ATI Technologies Tiller 365 User Manual
Bakers Pride Oven Food Warmer MM4 User Manual
Behringer Work Light UP1000 User Manual