Behringer Air Compressor CS400 User Manual

COMPRESSOR SUSTAINER CS400  
Thank you for showing your confidence in us by purchasing the BEHRINGER  
COMPRESSOR SUSTAINER CS400. This ultimate effects pedal is specifically designed to  
achieve super-smooth compression and endless sustain. Thanks to its high-performance  
features you can compress loud and boost low signals without degrading the original  
sound.  
A compressor limits the dynamic range of a signal. This means that signal peaks will be  
attenuated and the level differences between loudest and softest playing are reduced.  
This results in a more powerful and pressure-rich tone.  
1. CONTROLS  
Top view  
The LEVEL control adjusts the output level.  
Turn up the TONE control to achieve more presence and sound clarity.  
The ATTACK control determines how fast the compressor reacts on the input  
signal. The attack time is sweepable between slow and fast.  
The SUSTAIN control determines the amount of compression that results in long-  
lasting tones.  
The ON/BATT LED illuminates when the effect is activated. It also serves as a  
battery level indicator.  
Use the footswitch to activate/deactivate the effect.  
Use this 1/4" TS IN connector to plug in the instrument cable.  
The 1/4" TS OUT connector sends the signal to your amp.  
Use the DC IN connection at the front of the unit to plug in a 9 V power supply (not included).  
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or  
replace the 9 V battery, press the hinges with a ballpen and remove the pedal cover. Be  
careful not to scratch the unit.  
 

3M Wheelchair FR330 User Manual
Abocom Network Card HP2000 User Manual
ACDelco Automobile Parts 26 SI User Manual
Acer Computer Monitor S243HL User Manual
Airlink Network Card CDMA 1x User Manual
Alba Flat Panel Television L26M1 User Manual
Amcor GPS Receiver 4300 B User Manual
American Dryer Corp Clothes Dryer ADG MLG 170DR User Manual
Atlona Car Amplifier AT HD19SS User Manual
Audiovox Remote Starter APS 785 User Manual