Behringer Car Speaker 3030A User Manual

Studio Monitors  
TRUTH  
B3031A/B3030A  
TRUTH — 2-Way Active Ribbon Studio  
Reference Monitor with Kevlar Woofer  
Ultra-linear frequency response with  
individual frequency diagrams  
Built-in 150 and 75 watt power  
amplifiers (75 and 35 watt for  
B3030A) with enormous  
power reserve  
Honesty  
When it comes to your studio  
our acoustic engineers decided to start  
there and see just how far they could  
push the envelope. They tried a variety  
of transducers and enclosure designs,  
along with existing and emerging  
technologies. When all the dust settled,  
they chose to deploy an ultra-high  
resolution, 2" velocity ribbon transducer  
and a long-throw, Kevlar-coned woofer  
in a deformation-resistant, die-cast  
aluminum chassis.  
Ultra-high resolution, 2" velocity  
ribbon transducer for ultimate  
sound reproduction  
recordings, you want honesty. In fact,  
considering how important your art is,  
you should demand it! That’s why we  
designed the new B3030A and B3031A  
Reference Monitors to speak nothing  
but the TRUTH. Oh, they still sound  
great hooked up to your stereo or your  
video surround system, but they were  
really built with the studio in mind —  
where every note you play or sing is  
“under the microscope.”  
Long-throw 8 ¾" woofer (6 ¾" for  
B3030A) with deformation-resistant  
Kevlar cone and aluminum die-cast  
chassis for ultimate bass response  
Controlled dispersion characteristics  
and extremely large “sweet spot”  
owing to the unique BEHRINGER  
wave guide technology  
Why Kevlar?  
We’re glad you asked. Kevlar has an  
incredible strength-to-weight ratio —  
that’s one reason it’s used in bulletproof  
vests. Kevlar gives our LF transducer the  
strength to handle the extremely high  
energy levels required for distortion-free,  
chest-pounding bass. And since they  
have such low mass, Kevlar speaker  
cones also respond much more quickly  
than those made of paper, important  
for not only maintaining bass content  
integrity, but critical for midrange accuracy  
and definition. Our Kevlar transducers  
reproduce even the subtlest nuance  
of the low-frequency realm without  
muddying the midrange.  
Built on a Legacy  
Active crossover network with  
4th order Linkwitz-Riley filters  
Our TRUTH B2030A and B2031A monitors  
have been so wildly successful that we’ve  
sold thousands upon thousands of them  
to some of the most critical ears on the  
planet. So, from the moment we started this  
project, we knew these new speakers would  
have to be something really special, and  
indeed they are!  
Adjustable to a wide range of  
acoustic conditions and  
subwoofer operation  
Separately controlled limiter for low  
and high-frequency  
overload protection  
Years of R’n’D  
Magnetic shielding allows placement  
near computer monitors  
For the past two years our Resead  
Development team has been on a  
mission to create the “perfectstudio  
monitor. Since the TRUTH B2031A had  
already become the industry standard,  
Servo-balanced inputs with XLR and  
¼" TRS connectors  
High-quality components and  
exceptionally rugged construction  
ensure long life  
Continued on next page  
Conceived and designed by  
BEHRINGER Germany  
 
Page 3 of 4  
Computer Setup  
TRUTH  
B3031A/B3030A  
Placement is also critical. Ideally, all loudspeakers  
should be placed away from walls to ensure proper  
bass response. But fear not, B3030A/B3031A  
monitors feature Room Compensation switches  
so you can place them against walls, or even in  
corners. Walls tend to enhance low-frequency  
content, and corners exaggerate bass even more,  
but your TRUTH monitor can be custom-tailored  
to provide honest bass response for your situation,  
with the simple flick of a switch or two.  
Laptop  
UCA222  
USB Audio Interface  
B3031A  
Non-fatiguing, WideSweet Spot”  
Recording  
While some of our competitor’s studio monitors  
have a highly focused “sweet spot(the optimal  
listening position for a pair of loudspeakers),  
our wave-guide is designed to create a much more  
generous, broader listening zone. That means you  
won’t wear a hole in the carpet in that one spot  
where everything sounds great. You are free to  
move around inside the stereo image to find the  
ideal spot in the mix for subtle instrument or effects  
placement opportunities. You also won’t suffer the  
ravages of “monitor-fatigue-syndrome,”  
B3031A  
Laptop  
Control Out  
Left and Right  
an ailment that comes from listening to harsh  
high-mids and treble content for hours on end.  
The new 2" velocity ribbon transducer, along with  
our proprietary wave-guide design, generates  
silky-smooth high-end that is non-fatiguing, even  
during those all-night mix-down sessions that can  
test your nerves.  
XM8500  
Hearing is Believing  
We could bore you to tears with all the technical  
jargon (if you really like that stuff, there’s a special  
treat at the end), but hearing the TRUTH will make  
you a believer. From the “bulletproofbass of its  
Kevlar woofer to the silky top-end of its ribbon  
transducer, we think you’ll agree that nothing in  
this class outperforms the B3030A and B3031A  
monitors. Compare them to the competition and  
own BEHRINGER!  
V-AMP PRO  
X2222USB  
 
Page 4 of 4  
TRUTH  
B3031A/B3030A  
Power  
switch  
2" velocity  
Room Compensation  
switch adjusts bass  
when speakers are  
placed against walls  
or in corners  
Low Frequency  
switch for use  
with subs or to  
simulate smaller  
speakers  
ribbon HF  
transducer  
(tweeter)  
Power Mode  
High  
HF wave-  
guide  
switch On/Off/  
Auto (B3031A  
only) - Auto mode  
puts system in  
standby until  
Frequency  
switch  
adjusts treble  
content  
Power/Limit LEDs  
show power on  
and input signal  
overload  
signal detected  
Mute Low and  
Mute High  
switches (B3031A  
only, for service  
technician)  
Kevlar LF  
transducer  
(woofer)  
Input Trim  
control sets  
volume level  
Input accepts  
XLR and ¼" TRS  
IEC power  
socket  
SPECIFICATIONS  
High-frequency range  
B3030A  
100 - 120 V~, 50/60 Hz  
T 2.0 A H 250 V  
B3031A/B3030A  
B3031A  
RMS @ 0.1 % THD  
(sine wave)  
220 - 230 V~, 50/60 Hz  
T 1.6 A H 250 V  
30 W @ 6 Ω  
Audio Inputs  
XLR connector  
¼" TRS  
B3031A  
Power consumption  
servo-balanced input  
servo-balanced input  
10 kΩ  
Peak power 75 W @ 6 Ω  
max. 200 W  
B3030A  
RMS @ 0.1 % THD  
(sine wave)  
Mains connection  
Standard IEC connector  
Input impedance  
Input Trim  
25 W @ 6 Ω  
35 W @ 6 Ω  
–6 dB to +6 dB  
+22 dBu  
B3030A  
Power consumption  
Max. input level  
max. 110 W  
Peak power  
Mains connection  
Standard IEC connector  
TRANSDUCERS  
DIMENSIONS/WEIGHT  
B3031A  
CROSSOVER  
High-frequency driver  
2" ribbon  
B3031A  
Dimensions (HxWxD)  
B3031A/B3030A  
Type  
Low-frequency driver  
8 ¾" diameter Kevlar diaphragm  
15.75 x 9.81 x 11.38"  
400 x 250 x 290 mm  
active, 4th order Linkwitz-Riley  
3.6 kHz  
B3030A  
High-frequency driver  
Crossover frequency  
Weight  
33 lbs/15 kg  
2" ribbon  
SYSTEM SPECIFICATION  
B3030A  
Dimensions (HxWxD)  
Low-frequency driver  
6 ¾" diameter Kevlar diaphragm  
B3031A  
12.50 x 8.40 x 8.33"  
315 x 215 x 210 mm  
AMPLIFIER OUTPUT POWER  
Low-frequency range  
B3031A  
Frequency response  
Sound pressure level  
B3030A  
50 Hz to 24 kHz  
Weight  
22 lbs/10 kg  
max. 116 dB SPL @ 1 m (pair)  
Please note these specifications are preliminary and conceptual in nature,  
and as such are subject to change as product development progresses.  
This information is supplied for market research purposes only and is not  
to be made public in any manner. This document is solely the property of  
The MUSIC Group, or one of its subsidiaries, and must be surrendered upon  
request of the owner.  
Frequency response  
50 Hz to 24 kHz  
RMS @ 0.1 % THD  
(sine wave)  
100 W @ 4 Ω  
Sound pressure level  
max. 113 dB SPL @ 1 m (pair)  
Peak power  
150 W @ 4 Ω  
POWER SUPPLY  
Voltage/Fuses  
B3030A  
RMS @ 0.1 % THD  
(sine wave)  
50 W @ 4 Ω  
75 W @ 4 Ω  
B3031A  
100 - 120 V~, 50/60 Hz  
Peak power  
T 5.0 A H 250 V  
T 2.5 A H 250 V  
220 - 230 V~, 50/60 Hz  
For service, support or more information contact the BEHRINGER location nearest you:  
Europe  
Tel.: +49 2154 9206 4149  
Fax: +49 2154 9206 4199  
Singapore  
Tel.: +65 6845 1800  
Fax: +65 6214 0275  
Tel.: +61 03 9877 7170  
Fax: +61 03 9877 7870  
Japan  
Tel.: +81 3 5281 1180  
Fax: +81 3 5281 1181  
USA/Canada Tel.: +1 425 672 0816  
Australia  
Fax: +1 425 673 7647  
©2011 Red Chip Company Ltd. Technical specifications and appearance subject to change without notice. The information contained herein is correct at the time of printing. All trademarks are the property of their respective owners. BEHRINGER accepts no liability for any loss which  
may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. 985-10000-00360  
 

Aastra Telecom Telephone M6320 User Manual
Acer Computer Monitor UMHS5AA001 User Manual
ACR Electronics Marine RADAR 2714 User Manual
Actiontec electronic Network Router UD800TP User Manual
AEG Cooktop 6510K7 M User Manual
Agri Fab Outdoor Cart 45 0345 User Manual
Airlux Group Toaster 13467 1200 0512 User Manual
Audiovox Automobile Electronics ACAM350 User Manual
Bang Olufsen Cable Box 26 Jun User Manual
Beko Freezer CFA1300W User Manual