Behringer Music Pedal DM100 User Manual

DISTORTION MODELER DM100  
Thank you for showing your confidence in us by purchasing the BEHRINGER  
DISTORTION MODELER DM100. This high-quality modeling effects pedal provides electric  
guitars with state-of-the-art distortion sounds of the most legendary pedals. It features  
a mode switch that lets you choose between these renowned distortion simulations  
and achieve the right tone for any situation.  
1. CONTROLS  
Top view  
Use the MODE switch to chose between the three different distortion simulations.  
DS1 provides a hard distortion that reproduces the subtle nuances of your playing  
dynamics. With D+ you can achieve everything from retro-style soft-clipped distortion  
to classic fuzzy tones. RAT delivers fat smooth distortion with a whole lot of  
sustain and cut-through power.  
The DIST(ortion) control adjusts the amount of distortion effect.  
The TONE control allows you to shape your overall sound.  
The LEVEL control adjusts the output level.  
The ON/BATT LED illuminates when the effect is activated. It also serves as a  
battery level indicator.  
Use the footswitch to activate/deactivate the effect.  
Use this 1/4" TS IN connector to plug in the instrument cable.  
The 1/4" TS OUT connector sends the signal to your amp.  
Use the DC IN connection to plug in a 9 V power supply (not included).  
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or  
replace the 9 V battery, press the hinges with a ballpen and remove the pedal cover. Be  
careful not to scratch the unit.  
 

3Com Switch 3C17500 User Manual
3M Air Conditioner 7684 S 8 User Manual
Acer Projector 1100E User Manual
Actron Indoor Furnishings Inductive Timing Light User Manual
AGFA Digital Camera DC 1338i User Manual
Agilent Technologies Portable Generator 08111 90002 User Manual
Airlink101 Network Card AWLL3026 User Manual
AMX Network Card Octaire User Manual
Behringer Stereo Amplifier VP1520D User Manual
Beko Dishwasher DFS 1511 User Manual