Behringer Music Pedal SM200 User Manual

SLOW MOTION SM200  
Thank you for showing your confidence in us by purchasing the BEHRINGER SLOW  
MOTION SM200. This effects pedal makes your guitar sound like a violin and lets you  
experience real cool 80's effects!  
1. CONTROLS  
Top view  
The SENS control adjusts the sensitivity at which picking strength the effect is  
activated. Low SENS settings are not suitable for slow harmony changes, but  
good for rapid staccato lines.  
The ATTACK control determines how fast the effect swells the volume of the input  
signal.  
The ON/BATT LED illuminates when the effect is activated. It also serves as a  
battery level indicator.  
Use the footswitch to activate/deactivate the effect.  
Use this 1/4" TS IN connector to plug in the instrument cable.  
The 1/4" TS OUT connector sends the signal to your amp.  
Use the DC IN connection to plug in a 9 V power supply (not included).  
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or  
replace the 9 V battery (not included), press the hinges with a ballpoint pen and remove  
the pedal cover. Be careful not to scratch the unit.  
The SM200 has no on/off switch. As soon as you insert the plug into the IN  
connector, the SM200 is on. When not in use, remove the plug from the IN  
connector. This extends the life of the battery.  
The SERIAL NUMBER is located at the underside.  
 

ADC Clothes Dryer AD 360X2 User Manual
Admiral Kitchen Utensil Kitchen Utensil User Manual
Alpine Car Amplifier PDX M12 User Manual
AMX Network Router nxc User Manual
Apple MP3 Player ZM034 4945 A User Manual
Atlona Marine Radio AT DVI30SR User Manual
Audiovox Automobile Alarm TSP 575 User Manual
Audiovox Automobile Electronics AA RS5CS User Manual
Aviom Music Mixer 6416M User Manual
Behringer Speaker System B2031P User Manual