For more details on the full functionality of this product, see the product page on
behringer.com and download the full manual.
CONCERT CDP2400USB
Enjoy the Sound of a Concert Grand - Play Straight Away with
Included Piano Learning Software and USB Interface
2
CONCERT CDP2400USB
Quick Start Guide
3
9. Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding-type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If the BE REPRODUCED OR TRANSMITTED IN ANY FORM
provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
MUSIC GROUP AND HAVE ABSOLUTELY NO AUTHORITY
TO BIND MUSIC GROUP BY ANY EXPRESS OR IMPLIED
UNDERTAKING OR REPRESENTATION. THIS MANUAL
IS COPYRIGHTED. NO PART OF THIS MANUAL MAY
§ 3 Return materials authorization
Free inspections and maintenance/repair work
§ 6 Claim for damage
Subject only to the operation of mandatory applicable
local laws, MUSIC Group shall have no liability to the buyer
under this warranty for any consequential or indirect
loss or damage of any kind. In no event shall the liability
of MUSIC Group under this limited warranty exceed the
invoiced value of the product.
(5)
Important Safety
Instructions
are expressly excluded from this limited warranty, in
particular, if caused by improper handling of the product
by the user. This also applies to defects caused by normal
wear and tear, in particular, of faders, crossfaders,
potentiometers, keys/buttons, guitar strings, illuminants
and similar parts.
(1) To obtain warranty service, please contact the
retailer from whom the equipment was purchased.
Should your MUSIC Group Authorized Reseller not be
located in your vicinity, you may contact the MUSIC Group
Authorized Fulfiller for your country listed under
“Support”at behringer.com. If your country is not
listed, please check if your problem can be dealt with
by our“Online Support”which may also be found under
“Support”at behringer.com. Alternatively, please submit
an online warranty claim at behringer.com BEFORE
returning the product. All inquiries must be accompanied
by a description of the problem and the serial number
of the product. After verifying the product’s warranty
eligibility with the original sales receipt, MUSIC Group
will then issue a Return Materials Authorization
(“RMA”) number.
OR BY ANY MEANS, ELECTRONIC OR MECHANICAL,
INCLUDING PHOTOCOPYING AND RECORDING OF ANY
KIND, FOR ANY PURPOSE, WITHOUT THE EXPRESS
WRITTEN PERMISSION OF MUSIC GROUP IP LTD.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
(6) Damage/defects caused by the following conditions
are not covered by this limited warranty:
§ 7 Limitation of liability
Terminals marked with this symbol carry
electrical current of sufficient magnitude
to constitute risk of electric shock. Use only
This limited warranty is the complete and exclusive
warranty between you and MUSIC Group. It supersedes
all other written or oral communications related to this
product. MUSIC Group provides no other warranties for
this product.
ALL RIGHTS RESERVED.
© 2011 MUSIC Group IP Ltd.
Trident Chambers, Wickhams Cay, P.O. Box 146,
Road Town, Tortola, British Virgin Islands
•
improper handling, neglect or failure to operate the
unit in compliance with the instructions given in
BEHRINGER user or service manuals;
11. Use only attachments/accessories specified by
the manufacturer.
high-quality commercially-available speaker cables with
¼" TS plugs pre-installed. All other installation or
modification should be performed only by
qualified personnel.
•
connection or operation of the unit in any way
that does not comply with the technical or safety
regulations applicable in the country where the
product is used;
12. Use only with the
cart, stand, tripod, bracket,
or table specified by the
manufacturer, or sold with
the apparatus. When a cart
is used, use caution when
moving the cart/apparatus
combination to avoid
LIMITED WARRANTY
§ 1 Warranty
§ 8 Other warranty rights and
national law
This symbol, wherever it appears,
alerts you to the presence of uninsulated
dangerous voltage inside the
•
damage/defects caused by acts of God/Nature
(accident, fire, flood, etc) or any other condition that
is beyond the control of MUSIC Group.
(1) This limited warranty does not exclude or limit the
buyer’s statutory rights as a consumer in any way.
(2) Subsequently, the product must be returned in
its original shipping carton, together with the return
authorization number to the address indicated by
MUSIC Group.
(1) This limited warranty is valid only if you purchased
the product from a MUSIC Group Authorized Reseller in
the country of purchase. A list of authorized resellers can
be found on BEHRINGER’s website behringer.com under
“Where to Buy“, or you can contact the MUSIC Group office
closest to you.
enclosure - voltage that may be sufficient to constitute a
risk of shock.
(2) The limited warranty regulations mentioned herein
are applicable unless they constitute an infringement of
applicable mandatory local laws.
(7) Any repair or opening of the unit carried out by
unauthorized personnel (user included) will void the
limited warranty.
injury from tip-over.
(3) Shipments without freight prepaid will not
be accepted.
This symbol, wherever it appears,
alerts you to important operating and
maintenance instructions in the
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
(3) This warranty does not detract from the seller’s
obligations in regard to any lack of conformity of the
product and any hidden defect.
(8) If an inspection of the product by MUSIC Group
shows that the defect in question is not covered by the
limited warranty, the inspection costs are payable by
the customer.
(2) MUSIC Group* warrants the mechanical and
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power supply cord or plug
is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed
to rain or moisture, does not operate normally, or has
been dropped.
§ 4 Warranty Exclusions
accompanying literature. Please read the manual.
electronic components of this product to be free of defects
in material and workmanship if used under normal
operating conditions for a period of one (1) year from
the original date of purchase (see the Limited Warranty
terms in § 4 below), unless a longer minimum warranty
period is mandated by applicable local laws. If the product
shows any defects within the specified warranty period
and that defect is not excluded under § 4, MUSIC Group
shall, at its discretion, either replace or repair the product
using suitable new or reconditioned product or parts.
(1) This limited warranty does not cover consumable
parts including, but not limited to, fuses and batteries.
Where applicable, MUSIC Group warrants the valves or
meters contained in the product to be free from defects in limited warranty will be repaired exclusively at the buyer’s notice. For the latest warranty terms and conditions
material and workmanship for a period of ninety (90) days expense. MUSIC Group or its authorized service center will and additional information regarding MUSIC Group’s
Caution
§ 9 Amendment
Warranty service conditions are subject to change without
To reduce the risk of electric shock, do
not remove the top cover (or the rear
section). No user serviceable parts inside. Refer servicing
to qualified personnel.
(9) Products which do not meet the terms of this
from date of purchase.
inform the buyer of any such circumstance. If the buyer
fails to submit a written repair order within 6 weeks after
notification, MUSIC Group will return the unit C.O.D. with
a separate invoice for freight and packing. Such costs will
also be invoiced separately when the buyer has sent in a
written repair order.
limited warranty, please see complete details online at
behringer.com.
15. The apparatus shall be connected to a MAINS socket
outlet with a protective earthing connection.
Caution
(2) This limited warranty does not cover the product
if it has been electronically or mechanically modified
in any way. If the product needs to be modified or
adapted in order to comply with applicable technical
or safety standards on a national or local level, in any
country which is not the country for which the product
was originally developed and manufactured, this
modification/adaptation shall not be considered a defect
in materials or workmanship. This limited warranty does
not cover any such modification/adaptation, regardless
of whether it was carried out properly or not. Under the
terms of this limited warranty, MUSIC Group shall not
be held responsible for any cost resulting from such a
modification/adaptation.
To reduce the risk of fire or electric shock,
do not expose this appliance to rain and
moisture. The apparatus shall not be exposed to dripping
* MUSIC Group Macao Commercial Offshore Limited of
Rue de Pequim No. 202-A, Macau Finance Centre 9/J, Macau,
including all MUSIC Group companies
16. Where the MAINS plug or an appliance coupler is
used as the disconnect device, the disconnect device shall In case MUSIC Group decides to replace the entire product,
or splashing liquids and no objects filled with liquids, such remain readily operable.
as vases, shall be placed on the apparatus.
this limited warranty shall apply to the replacement
product for the remaining initial warranty period, i.e.,
one (1) year (or otherwise applicable minimum warranty
period) from the date of purchase of the original product.
(10) MUSIC Group Authorized Resellers do not sell new
products directly in online auctions. Purchases made
through an online auction are on a“buyer beware”basis.
Online auction confirmations or sales receipts are not
accepted for warranty verification and MUSIC Group will
not repair or replace any product purchased through an
online auction.
Caution
These service instructions are for use
by qualified service personnel only.
(3) Upon validation of the warranty claim, the repaired
or replacement product will be returned to the user freight
prepaid by MUSIC Group.
To reduce the risk of electric shock do not perform any
servicing other than that contained in the operation
instructions. Repairs have to be performed by qualified
service personnel.
(4) Warranty claims other than those indicated above
are expressly excluded.
§ 5 Warranty transferability
PLEASE RETAIN YOUR SALES RECEIPT. IT IS YOUR PROOF
OF PURCHASE COVERING YOUR LIMITED WARRANTY.
THIS LIMITED WARRANTY IS VOID WITHOUT SUCH PROOF
OF PURCHASE.
LEGAL DISCLAIMER
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
This limited warranty is extended exclusively to the
original buyer (customer of authorized reseller) and is
not transferable to anyone who may subsequently
purchase this product. No other person (reseller, etc.)
shall be entitled to give any warranty promise on behalf
of MUSIC Group.
(3) This limited warranty covers only the product
hardware. It does not cover technical assistance for
hardware or software usage and it does not cover
any software products whether or not contained in
the product. Any such software is provided“AS IS”
unless expressly provided for in any enclosed software
limited warranty.
TECHNICAL SPECIFICATIONS AND APPEARANCES
ARE SUBJECT TO CHANGE WITHOUT NOTICE AND
ACCURACY IS NOT GUARANTEED. BEHRINGER IS
PART OF THE MUSIC GROUP (MUSIC-GROUP.COM).
ALL TRADEMARKS ARE THE PROPERTY OF THEIR
RESPECTIVE OWNERS. MUSIC GROUP ACCEPTS NO
LIABILITY FOR ANY LOSS WHICH MAY BE SUFFERED
BY ANY PERSON WHO RELIES EITHER WHOLLY OR
IN PART UPON ANY DESCRIPTION, PHOTOGRAPH
OR STATEMENT CONTAINED HEREIN. COLORS AND
SPECIFICATIONS MAY VARY FROM ACTUAL PRODUCT.
MUSIC GROUP PRODUCTS ARE SOLD THROUGH
AUTHORIZED FULLFILLERS AND RESELLERS ONLY.
FULLFILLERS AND RESELLERS ARE NOT AGENTS OF
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
§ 2 Online registration
Please do remember to register your new BEHRINGER
equipment right after your purchase at behringer.com
under“Support”and kindly read the terms and conditions
of our limited warranty carefully. Registering your
purchase and equipment with us helps us process
your repair claims quicker and more efficiently.
Thank you for your cooperation!
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
(4) This limited warranty is invalid if the factory-
applied serial number has been altered or removed from
the product.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
4
CONCERT CDP2400USB
5
Quick Start Guide
CONCERT CDP2400USB Controls
(EN) Controls
(29)
(1) (3)
(7) (9) (11)
(13)
POWER
(2) (4) (5) (6) (8) (10)
(12)
(14)
(15) (17)
(16) (18)
(30)
(26)
(27)
(28)
(1)
(2)
(3)
VOLUME: is used to adjust the volume of the built-in loudspeakers and headphone outputs.
COLOR: Varies the sound character from soft (left) to bright (right).
(15)
(16)
(17)
REVERB: Selects one of four room effects (CHAMBER, CONCERT, CHURCH, THEATER)
for the selected sound. An LED shows which effect is currently active. If no LED lights up,
no room effect is active.
(25)
USB: Connect the CDP2400USB to a computer using a type B USB connector.
This connection will transmit both the audio from the internal sound generator as well
as MIDI data. You may use this to record performances or control software on your
computer via MIDI.
SPEAKERS OFF: Switches the built-in loudspeakers on and off. The MUTE LED lights up only
when the built-in loudspeakers are switched off.
SPECIAL: Is used to select one of four modulation effects (CHORUS, FLANGER,
TREMOLO, DELAY) for the selected sound. An LED shows which effect is currently
active. If no LED lights up, no modulation effect is active.
(26)
(27)
Soft/Piano pedal: Use this to reduce the volume of a particular passage.
Sostenuto pedal: This pedal sustains notes that allow distinct advantages:
(4)
(5)
(6)
DEMO: Enables/disables DEMO mode.
KEYS: Is used to set the key velocity to SOFT, MEDIUM or HARD. An LED shows which setting
is currently active. If no LED lights up, no key velocity has been selected and playing a key
always triggers a fixed volume level, irrespective of how hard you play the key.
CLICK: Is used to start/stop the metronome click.
•
Play a note or chord on the keys
TRACK 1: Selects track 1 for playback or recording. The REC LED lights up when the track
has been activated for recording. The PLAY LED lights up when the track has been set for
playback and already contains musical data.
•
•
While holding the note(s), press the sostenuto pedal
(18)
(19)
TRANSPOSE: Is used for setting keyboard/pitch transposition.
Notes played before the pedal was pressed will continue to sustain, while those played
after the pedal was pressed decay normally
MIC IN: Connect a dynamic or condenser microphone to this input using a standard
XLR cable. The jack automatically supplies 15V of phantom power. Adjust the input
sensitivity with the adjacent GAIN control.
(7)
TRACK 2: Selects track 2 for playback or recording. The REC LED lights up when the track
has been activated for recording. The PLAY LED lights up when the track has been set for
playback and already contains musical data.
(28)
Damper/Forte pedal: All notes sustain when the damper/forte pedal is pressed,
even if you release the key(s).
(20)
(21)
AUX IN: Connect external sound sources such as a CD or MP3 player using a 1⁄8" plug.
(29)
(30)
Power: Press this button to turn the CDP2400USB on and off.
HEADPHONE JACKS.
(8)
(9)
(10)
Is used to start/stop playback or recording of the music sequencer.
LINE IN: Connect external sound sources such as CD players, mixers or drum machines
using RCA cables.
REC: Activates record mode.
MODE: Selects the TEMPO parameter and menu pages for EDIT mode. The EDIT MODE LED
shows in EDIT mode, the TEMPO LED in TEMPO mode.
(22)
(23)
(24)
LINE OUT: Connect the CDP2400USB to an external sound system or recording device
using RCA cables.
For more details on the full functionality of this product, see the product
page on behringer.com and download the full manual.
(11)
(12)
(13)
(14)
Down/Up: Depending on which mode you have selected with the MODE button, these two
buttons can be used to enter the tempo or to scroll through the EDIT mode menu pages.
PEDALS: Connect the foot pedals of the CDP2400USB to this jack using the included
5-pin cable.
Display: Depending on the function used, the display reads the tempo, menu numbers or
parameter values.
MIDI: Connect external devices such as synthesizers, sequencers, etc. to the CDP2400USB’s
using 5-pin DIN cables (MIDI cables). MIDI IN receives data that controls the CDP2400USB’s
internal sound generator. MIDI OUT sends controlling data from the CDP2400USB’s keys
and pedals to other MIDI devices.MIDI THRU transmits data from the MIDI IN jack to other
MIDI devices without altering the data.
-/NO, +/YES: Is used to raise/lower the parameter values shown in the display.
Additionally, the +/YES button executes certain EDIT functions.
TONE: These 14 buttons are used for sound selection. In DEMO mode they are used to select
individual sound color demos.
6
CONCERT CDP2400USB
Quick Start Guide
7
Specifications
Other important information
Keyboard
88weighted keys with hammer action (A-1 to C7)
Sound generation
Important information
RSM (Real Sound Modeling) dynamic stereo sampling
1. Register online. Please register your new
MUSIC Group equipment right after you purchase it by
visiting behringer.com. Registering your purchase using
our simple online form helps us to process your repair
claims more quickly and efficiently. Also, read the terms
and conditions of our warranty, if applicable.
Polyphony
64 notes max.
Sounds
14
Effects
Room Effects
Modulation effects
Sequencer
Type
Memory
Pedals
4 types (CHAMBER, CONCERT, CHURCH, THEATER)
4 types (CHORUS, FLANGER, TREMOLO, DELAY)
2. Malfunction. Should your MUSIC Group
Authorized Reseller not be located in your vicinity, you
may contact the MUSIC Group Authorized Fulfiller for
your country listed under “Support” at behringer.com.
Should your country not be listed, please check if your
problem can be dealt with by our “Online Support” which
may also be found under “Support” at behringer.com.
Alternatively, please submit an online warranty claim at
behringer.com BEFORE returning the product.
2-track
1 Song, approx. 10,000 notes
3 (soft-, sostenuto-, damper)
MIC IN
Connector
Phantom Power
AUX IN
XLR, balanced
15V
3. Power Connections. Before plugging the
unit into a power socket, please make sure you are using
the correct mains voltage for your particular model.
Faulty fuses must be replaced with fuses of the same
type and rating without exception.
Connector
LINE IN
1/8" TRS jack
Connectors
Impedance
LINE OUT
RCA jacks, unbalanced
approx. 10 kΩ
Connectors
Impedance
Max. output level
Phones
RCA, unbalanced
approx. 100 Ω, unbalanced
+7 dBu
Connectors
Max. output level
MIDI
¼" TRS jack, 1/8" TRS jack
+13 dBu/120mW @ 100 Ω load
Connectors
USB
IN, OUT, THRU
Connector
Converter
Sample Rate
MIDI
Type B
16-bit
48 kHz
IN, OUT
Audio
Stereo In/Out
Amplifier
Output power
Power Supply
2 x 40 W
100 - 120 V~, 50/60 Hz T 2,50 A H 250 V
220 - 230 V~, 50/60 Hz T 1,25 A H 250 V
Power consumption approx. 135 W
Mains voltages and fuse values
Dimensions / Weight
approx. 880 x 1,405 x 525 mm
approx. 34.65" x 55.31" x 20.67"
Dimensions (H x W x D)
approx. 68.8 kg
approx. 151.7 lbs
Weight
8
CONCERT CDP2400USB
Quick Start Guide
9
FEDERAL COMMUNICATIONS
COMMISSION COMPLIANCE
INFORMATION
CONCERT CDP2400USB
Responsible Party Name:
Address:
MUSIC Group Services US Inc.
18912 North Creek Parkway,
Suite 200 Bothell, WA 98011,
USA
Phone/Fax No.:
Phone: +1 425 672 0816
Fax: +1 425 673 7647
CONCERT CDP2400USB
complies with the FCC rules as mentioned in the following paragraph:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
•
•
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected
•
Consult the dealer or an experienced radio/TV technician for help
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Important information:
Changes or modifications to the equipment not expressly approved by MUSIC Group
can void the user’s authority to use the equipment.
|